How high does the the 1700+ AMD XP TBRED-B DLT3C JIUHB overclocks

[Cesar]

Owner's of these Cpu how high could you overclock?

 

[screw3d]

YMMV..

depends highly on the steppings..but a good guess would be about 2.1-2.3ghz..

Do a search!

 

[Corporate Thug]

look here

 

[ChampionAtTufshop]

depends what the date is and also those 4 letters afterwarrds

 

[screw3d]

Originally posted by: shady06
look here

Ohmigod.. let that thread diee !! 😉

EDIT: misquoted

 

[gplracer]

Mine does 215x11=2365mhz @ 1.7v

 

[4x4expy]

Linky

This is my 0319 $59 blue light special! I have since whittled back the voltage a little more with complete stability. I am satisfied for a while now. Though finding a Tbred B that will do 2.4ghz or higher is about as likely as being dealt a Blackjack in Vegas. It happens all the time, but not every time...

Good Luck.

 

[Corporate Thug]

Originally posted by: marvie

Originally posted by: shady06
look here

Ohmigod.. let that thread diee !! 😉

EDIT: misquoted

NEVER!

 

[sodcha0s]

AXDA1700DLT3C 9591037281677
JIUHB 0319WPMW

$59 from SVC

2424 (202x12) @ 1.74v Windows stable, Sandra stable, pukes in prime95 quickly... 😉

2200 (200x11) @ 1.5v Windows-sandra stable, runs prime for a few hours before locking

2000 or below, it is rock solid

What a gem of a cpu it is... 😀

 

[Cesar]

ok thats it number AXDA1700DLT3C JIUHB0319VPMW
is it good?

 

[JBT]

I've got a AXDA1700DLT3C JIUHB0319WPMW highest I had it was 2080 166 x 12.5 Mhz at default vcore. Will go highier once I get a new ram/motherboard setup.

 

[infinite012]

Originally posted by: Cesar
ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW
</STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

 

[Corporate Thug]

Originally posted by: infinite012

Originally posted by: Cesar
ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW
</STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

yeah, real interesting battle between 0310's abd 0319's. you should be able to get 2300mhz easy

 

[Cesar]

Originally posted by: infinite012

Originally posted by: Cesar ok thats it number AXDA1700DLT3C JIUHB0319VPMW is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

I can't I didn't buy my mobo or DDR ram 😉
I think i'm going with the DFI Lanparty NFII ultra for the mobo
and Corsair Twin XMS3200 256mb for the ram😎

 

[screw3d]

Originally posted by: infinite012

Originally posted by: Cesar
ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW
</STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

Oh nooo... I'm still waiting to see a chip that can do 200 x 12 stable @ 1.725v 😉

 

[Corporate Thug]

Originally posted by: Cesar

Originally posted by: infinite012

Originally posted by: Cesar ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW </STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

I can't I didn't buy my mobo or DDR ram 😉
I think i'm going with the DFI Lanparty NFII ultra for the mobo
and Corsair Twin XMS3200 256mb for the ram😎

mistakes, mistakes. the epox, abit, and asus boards are all better performers than the DFI board and are a lot cheaper. also, get regular XMS and run it in dual channel and save yourself some $$

 

[infinite012]

Originally posted by: shady06

Originally posted by: Cesar

Originally posted by: infinite012

Originally posted by: Cesar ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW </STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

I can't I didn't buy my mobo or DDR ram 😉
I think i'm going with the DFI Lanparty NFII ultra for the mobo
and Corsair Twin XMS3200 256mb for the ram😎

mistakes, mistakes. the epox, abit, and asus boards are all better performers than the DFI board and are a lot cheaper. also, get regular XMS and run it in dual channel and save yourself some $$

I go with shady06 on this. DFI Lanparty NFII board is waaaaaaaaay overpriced. You can buy 2 Epox 8RDA+'s with that kind of money! 😛

 

[Cesar]

Originally posted by: infinite012

Originally posted by: shady06

Originally posted by: Cesar

Originally posted by: infinite012

Originally posted by: Cesar ok thats it number AXDA1700DLT3C JIUHB0319VPMW is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

I can't I didn't buy my mobo or DDR ram 😉 I think i'm going with the DFI Lanparty NFII ultra for the mobo and Corsair Twin XMS3200 256mb for the ram😎

mistakes, mistakes. the epox, abit, and asus boards are all better performers than the DFI board and are a lot cheaper. also, get regular XMS and run it in dual channel and save yourself some $$

I go with shady06 on this. DFI Lanparty NFII board is waaaaaaaaay overpriced. You can buy 2 Epox 8RDA+'s with that kind of money! 😛

yes, but the Epox, Abit , and the Asus don't have 2 IDE Raid controllers and I really need them!

 

[infinite012]

Originally posted by: Cesar

Originally posted by: infinite012

Originally posted by: shady06

Originally posted by: Cesar

Originally posted by: infinite012

Originally posted by: Cesar ok thats it number <STRONG>AXDA1700DLT3C JIUHB0319VPMW </STRONG>is it good?

Why don't you try and tell us how well it overclocks? I'm seeing a new trend of 0319s yanking the pants off of some of these 0310s. Makes me wish I waited a little longer for a 0319 instead of the 0310...

I can't I didn't buy my mobo or DDR ram 😉 I think i'm going with the DFI Lanparty NFII ultra for the mobo and Corsair Twin XMS3200 256mb for the ram😎

mistakes, mistakes. the epox, abit, and asus boards are all better performers than the DFI board and are a lot cheaper. also, get regular XMS and run it in dual channel and save yourself some $$

I go with shady06 on this. DFI Lanparty NFII board is waaaaaaaaay overpriced. You can buy 2 Epox 8RDA+'s with that kind of money! 😛

yes, but the Epox, Abit , and the Asus don't have 2 IDE Raid controllers and I really need them!

Hahahah just to make this look really long.....

You could buy an Epox and then add in a RAID card for like $50...so it's still cheaper than buying a DFI lanparty IMO

 

[tigerbait]

I just got a 1700 DLT3C , JIUHB 0312 SPMW from newegg...gotta wait for rest of system before testing


any good?