How high can I overclocking this baby?

[Bad Dude]

Hi guys,
Just got this chip but no time to test it yet. I will in two days or so. I was just wondering from your estimate or experience, how high would this chip go to?

AMD Ahthlon 64
ADA2800AEP4AX
CBAZC 0449WPIW
1162136L40149

Thanks.

 

[Aenslead]

Reports that 2.35Ghz is reached easily:
Lower the LDT to 4x
If you have value/cheap RAM use divider or run it @ DDR333
Fiddle with FSB around 220-260Mhz
Increase voltage at MAX 1.65
Temps should never be above 65°C
HTT should never be above 1.1Ghz
That worked for me with my K8V Pro, w/VIA K8T800 Pro.

Have fun.

 

[imported_Kensai]

Originally posted by: Aenslead
Reports that 2.35Ghz is reached easily:
Lower the LDT to 4x
If you have value/cheap RAM use divider or run it @ DDR333
Fiddle with FSB around 220-260Mhz
Increase voltage at MAX 1.65
Temps should never be above 65°C
HTT should never be above 1.1Ghz
That worked for me with my K8V Pro, w/VIA K8T800 Pro.

Have fun.

Don't use the stock heatsink. 😉

 

[chinkgai]

Originally posted by: Aenslead
Lower the LDT to 4x

are you talking about the HTT multiplier? cuz if so...then its 4x stock, no?

 

[CheesePoofs]

Originally posted by: Kensai

Originally posted by: Aenslead
Reports that 2.35Ghz is reached easily:
Lower the LDT to 4x
If you have value/cheap RAM use divider or run it @ DDR333
Fiddle with FSB around 220-260Mhz
Increase voltage at MAX 1.65
Temps should never be above 65°C
HTT should never be above 1.1Ghz
That worked for me with my K8V Pro, w/VIA K8T800 Pro.

Have fun.

Don't use the stock heatsink. 😉

Why not? They don't really run too hot, so he should be able to get a decent OC out of it.

I don't know if I'd do 1.65v on the stock heatsink though. Seems a bit much.

 

[Bad Dude]

Thanks guys. I have the XP90. It's the OEM processor so no stock heatsink.