How do you clean your fleshlight?

FleshLight

Diamond Member
Mar 18, 2004
6,883
0
71
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
 

Schadenfroh

Elite Member
Mar 8, 2003
38,416
4
0
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.

the man has spoken
 

Zim Hosein

Super Moderator | Elite Member
Super Moderator
Nov 27, 1999
65,218
400
126
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.

:Q
 

Shawn

Lifer
Apr 20, 2003
32,236
53
91
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
that seems like a lot of work. :(
 

FleshLight

Diamond Member
Mar 18, 2004
6,883
0
71
Originally posted by: Supercharged
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
that seems like a lot of work. :(

You could send it to me and I'll clean it with my "special soap".
 

Zim Hosein

Super Moderator | Elite Member
Super Moderator
Nov 27, 1999
65,218
400
126
Originally posted by: FleshLight
Originally posted by: Supercharged
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
that seems like a lot of work. :(

You could send it to me and I'll clean it with my "special soap".

:Q
 

Jassi

Diamond Member
Sep 8, 2004
3,296
0
0
Originally posted by: FleshLight
Originally posted by: Supercharged
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
that seems like a lot of work. :(

You could send it to me and I'll clean it with my "special soap".



:shocked:
 

Nitemare

Lifer
Feb 8, 2001
35,461
4
81
Originally posted by: Supercharged
Originally posted by: FleshLight
After use, remove the gel insert from the plastic canister and run hot tap water through it to remove fluid deposits. To disinfect use rubbing alcohol.
Towel dry or air dry the gel insert. The gel insert will feel tacky or sticky after washing - this is normal. To restore the original silky feeling of the insert, powder it with cornstarch. Powdering it is not necessary to care for the insert.

Using soap or detergents to clean your gel insert will deteriorate the surface of the gel insert, resulting in a tackier feel.

Some people have asked if we could put a coating on the gel insert to lessen the tackiness. Unfortunately, the coatings that are currently available are toxic and may cause rashes. We consider our customers' health and well-being first, and will not use any substance that is not considered safe in e very way. We are constantly working to improve our products. Once a safe coating is available to us, we will make it available to our customers as well.

To properly re-position the gel insert inside the plastic canister, reach through the small end of the canister and pull the insert down into place.

This product was designed by the manufacturer for single-person use only. Do Not Share! Interactive Life Forms accepts no responsibility for improper or multiple-partner use of this product.
that seems like a lot of work. :(

Sometimes you have to suck it up and get your hands dirty... :)