How Do I see if Prime95 ran into any errors?

[magomago]

I started the test about 12 hours ago and its still going and I want to see if any problems have occured....but I don't want to stop the test


Anyone know a way because I'd like to see if my system is stable (which it isn't and i excpect P95 to have errors in all directions)

 

[Budman]

If there's an error it will change from red to yellow.

 

[chizow]

If your system isn't stable, run the torture test and it'll tell you in about 5 seconds

Chiz

 

[magomago]

http://ammarm.web1000.com/p95.jpg

All I have seen for the past twevels hours (well, I was sleeping for about 10 of them) is that

so is that stable or no?

 

[Oreo]

You'll notice right away if it isn't stable since Prime 95 will stop running. Just run "Torture test" and let it run. If it doesn't stop for say 12 h your system should be stable.

 

[JavaMomma]

It will stop the icon will turn yellow (from red) and give you a message something like the one below if your system is not 100% rock solid stable.
I think you are supposed to test 2-6 hours min. It shounds like your system is stable though.

FATAL ERROR: Final result was 1367BC2, expected: 1CA6048E
Hardware failure detected, consult stress.txt file.
Torture Test ran 1 hours, 19 minutes - 1 errors, 0 warnings.