how do I get MBM to display CPU diode temps?

[Maverick2002]

Ok I'm running an AXP 1700+ JIUHB DLT3C on a Biostar M7NCG-T (mATX nForce2) motherboard. MBM 5 only shows somewhat relative temps for Winbond 2 sensor. I'm guessing this is the external probe that rests inside the socket. How do I get MBM to display the temps reported by the internal diode in the CPU? Is it even possible?

 

[Maverick2002]

Ok, here's what MBM has available in terms of options, as well as a sample reported temperature:

Winbond 1: -48C
Winbond 1 2N3904: -47C
Winbond 1 Diode: -47C

Winbond 2: 38C
Winbond 2 2N3904: -61C
Winbond 2 Diode: -62C

Winbond 3: 42C
Winbond 3 2N3904: -47C
Winbond 3 Diode: -47C

Some from this I gather that both the Winbond 2 or 3 are the CPU temp readings? Is this correct? How would I know which one is the internal diode and which is the core diode? The label on the Winbond chip is W83627HF-AW if that helps any.

 

[Jeff7181]

The diode temp will be higher... so I'd say IF you can get a reading from the diode, it would be Winbond 3: 42C

Another way to check is to fire up Prime95 while you're watching the temp... the temp should jump 3-6 degrees almost immediately if it's being taken from the diode.