How are my voltages ?

[XBoxLPU]

PC #1
[*]Abit KX7-333
[*]XP 2000+ @ 2200+ ( 1.81ghz)
[*]180FSB w/ 10 Multiplier
[*]1.8Vcore/2.55 DDR V ( Bios )
[*]512 Samsung PC3200
[*]Antec 350Watt PS
Voltages

PC # 2
[*]Asus P4S333
[*]PIV 1.6A @ 2.32ghz
[*]145FSB
[*]SPD memory except 1T Command
[*]1.6Vcore/ 2.7V Memory
[*]128MB PC2100
[*]Enhance 300Watt PS
Voltages

 

[Inept]

Not too bad. If you're not having problems, I wouldn't worry about 'em.

 

[XBoxLPU]

Oh I am stable

I Have ran Seti and Prime 95 for ~10 hours on both PCs with no errors in Prime 95. And I run Seti 24/7 ....

 

[Duvie]

You need to get some pc3200 memory for that p4 board as well so you can run near 400mhz ddr speed...That would be a nice performance boost there.....I guess you would have to flash the p4s533 bios to it but you could get 4:5 and 4:6 ratios I believe....

 

[THUGSROOK]

the P4 system looks a little low ~ but if youre not having any problems i wouldnt worry about it.

 

[XBoxLPU]

Originally posted by: Duvie
You need to get some pc3200 memory for that p4 board as well so you can run near 400mhz ddr speed...That would be a nice performance boost there.....I guess you would have to flash the p4s533 bios to it but you could get 4:5 and 4:6 ratios I believe....

I thought the same thing but the Intel system just runs Seti which can do a WU eveyr 3hours to 3hours and 30mins which are fine to me. Plus, I had posted and ran the board with a 4:6 ratio but I had a problem. My Sandra Memory benchmark while running a 4:6 ratio at 140 FSB or higher was around 400/500 .........