Homegroup, ATT Uverse issue

[Ballatician]

Hi All,

I just recently set up ATT Uverse internet with one of their wireless 2-wire gateways (naked, no phone). My desktop is connected via ethernet cable and my laptop wirelessly.

I have the homegroup set up correctly (I think) because I can access my one shared folder from my desktop on my laptop.

Vice versa, I have issues. Desktop homegroup does not show any other computer connected.

I can ping each computer from each other using ip address or name and it works fine but for some reason my laptop won't show up on my desktop's homegroup.

The desktop is where I created the homegroup IIRC and I have tried restarting, changing pw's, etc.

The windows firewall settings are the same on both computers, my only other AV is Avira (free) which I don't even see any firewall settings for. Network discovery/sharing, etc is on and both are set as "Home" networks.

Since I can ping, I don't think it is a firewall issue. However, the router also has a built-in fireall accessibly via browser but I don't see any setting that would help me.

Any one have any experience or suggestions for me? I'd appreciate it if you do.

 

[Ballatician]

ttt

 

[Ballatician]

cmon AT don't fail me now

 

[Ballatician]

ok, I thought this problem was more prevalent. I will solve it con solo!

 

[JackMDS]

Win7 when configured on peer-to-peer Network has three types of Sharing configurations.

HomeGroup Network = Works only between Win 7 computers. This type of configuration makes it very easy to Entry Level Users to start Network sharing.

Work Network = Basically similar to the previous methods of sharing that let you control what, how, and to whom folders would be shared with.

Public Sharing = Public Network (like Internet cafe) to reduce security risks.

For best results log to each computer's System Screen and set all the computers to be on a Network with the same name while each computer has its own unique name.

http://www.ezlan.net/Win7/net_name.jpg

Make sure that the Software Firewall on each computer allows free local traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should be Off, and the active Firewall has to adjusted to your Network IP numbers on what is some time called the Trusted Zone (consult your 3rd Party Firewall instructions

General example, http://www.ezlan.net/faq.html#trusted

Please Note that some 3rd party Software Firewalls keep blocking aspects of Local Traffic even it they are turned Off (disabled). If possible configure the Firewall correctly, or totally uninstall it to allow clean flow of local network traffic. If the 3rd party software is uninstalled or disables, make sure that Windows native Firewall is On .

------------------------------
If your network is comprised of Win 7 only and you want a simple Network, use this.

http://windows.microsoft.com/en-us/windows7/help/videos/sharing-files-with-homegroup

After configuring the Homegroup scroll down to the Permission/Security section.

-----------------------------
Networking Win 7 with other version of Windows as Work Network.
In the Network Center, clicking on the Network type opens the window to the right.
Choose your type of Network. Notice the check mark at the bottom, and check/uncheck it according to your needs.

http://www.ezlan.net/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/...mputers-running-different-versions-of-Windows

Win 7 Work Network specific folder sharing - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista File and Printer Sharing- http://technet.microsoft.com/en-us/library/bb727037.aspx

Windows XP File Sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

Printer Sharing XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Windows Native Firewall setting for Sharing XP - http://support.microsoft.com/kb/875357

Windows XP patch for Sharing with Vista (Not need for XP-SP3) - http://support.microsoft.com/kb/922120

When finished with the setting of the system it is advisable to Reboot all the hardware including the Router and all computers involved.

-------------
If you have Permission and Security issues, check the following settings.
Point to the a Folder that meant to to be share. Right click and choose properties.
In the properties
Click on the Security tab shown in the pic bellow to the right) and check that the users and their permission (shown in the pic bellow center and left) are correctly configured. Then do the same to the Permission tab.
This screen shot is from Win 7, Vista's menus are similar.

http://www.ezlan.net/Win7/Permission-Security.jpg

In both the Security panel, and the Permission panel you have to highlight each User/Group and examine that the Permission Controls are checked correctly.

When everything is OK, Reboot the Network (Router, and computer).

* Note . The Groups and Users shown in the screen-shoot are just an example. Your list will look the way your system is configured.

**Note . You have to establish specific users. Everyone means all of the users that already have an account and been established as users. It does not mean Everyone that feel that they would like to login.

---------------------
***Note. Some of the processes described above are done Not for Windows sake but to compensate for different Routers and the way their firmware works and stores the info about the computers that are Networked.