Holy Cow! CUSL2 ROCKS!!

[cx32m4]

Only reason I couldn't get my FSB speed over 133mhz was my cheapoo generic pc133 ram. Plus it's impossible to find thos pc150 hsdram up here in canada.
In comes CUSL2..
set ratio to 133:100:33
In crease FSB to 143mhz

P3 700mhz @ 1Gighz

and ram still running under 133mhz and because it's running slower than its spec i can run it at 2-2-2.
I'll take 1gighz over slower ram anydayz.

 

[kimber]

gota agree.i'm at 150 with my mushkin basic.although i have to run case3.

 

[pm]

<< ...and ram still running under 133mhz and because it's running slower than its spec i can run it at 2-2-2.
I'll take 1gighz over slower ram anydayz. >>



You may want to benchmark this to be certain of this... you usually take a big hit switching the frequency down by 33MHz.

 

[cx32m4]

I checked and 1 Gig beats 933mhz.
and i think ram is running right now at around 110here...
When i increase the FSB over 133, ram also goes up from 100 but will never go over 133mhz,(133:100 = 142:109)

And plus, what's most important is that when I boot my computer it shows...

Pentium III 1000mhz


now that make me look cool to thos geek friends of mine.
it doesn't show if my ram is going 100 or 133 or 66, who cares, it doesn't show.
🙂🙂