Highest stable Hypertransport Speed on A8N-SLI

[Regulator07]

wondering if people can post the highest stable HT speed they have gotten on the A8N-sli board. i have mine at 1050 and it is stable and i have seen people around 1250 and still stable. just wondering if being above is safe and worth it, will being in the 800 range affect performance? i know people have said it does not, and then others have said it does, anyone got proof. also, does raising the HT increase temps either on the cpu or chipset (other than the obvious increase from the overclock)?

 

[Promethply]

My system's running HTT of 1165 (5 X 233FSB) stable.

 

[GuitarDaddy]

I ran mine at 1180 for awhile with no problems

 

[grooge]

even a 600MHz HT bus doesnt really affect performance... Neoseeker.com had an article about overclocking the A64 with benchmark and HT bus speed at about 400 was still performing good, but showing some performance loss at some place. a good reading ..

 

[Concillian]

Doesn't really matter, don't worry too much about your Hypertransport speed.

Article grooge was talking about:
http://www.neoseeker.com/Articles/Hardware/Guides/athlon64oc/2.html