Highest 2500+ bus speed?

[slag]

Whats the highest bus speed anyone here is running on their barton.

I was at 11.5x200, but have since gone to 10x225 and its stable. Little slower in terms of mhz, but probably faster overall with the faster memory.

 

[Richdog]

Damn I like your bloody username, makes me chuckle.

Anyway mate, i'm at 11*217. I've seen people get up to 250Mhz FSB with a Barton 2500+ though, albeit very rarely.:beer:

 

[LED]

I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

 

[hytek369]

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

 

[helloguy]

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

good job mate!

 

[LED]

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

 

[Jadow]

mine is only 204, but then again, I have kingston VALUE ram. I probably should have gotten better stuff, but I wanted to save the 30 bucks.

 

[LED]

Originally posted by: Jadow
mine is only 204, but then again, I have kingston VALUE ram. I probably should have gotten better stuff, but I wanted to save the 30 bucks.

Check the chips as lots of Kingston Value RAM had Winbond BH-5's on them. I just aquired some and the RAM does the 245FSB 11-2-2-2- @ 3.1v's

 

[hytek369]

Originally posted by: LED

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

nice mobo man, i wonder if the lanparty can do the same

 

[LED]

Originally posted by: hytek369

Originally posted by: LED

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

nice mobo man, i wonder if the lanparty can do the same

Yes with the newer Revs (SATA RAID)... they are essentially the same Mobo's

 

[helloguy]

Originally posted by: LED

Originally posted by: Jadow
mine is only 204, but then again, I have kingston VALUE ram. I probably should have gotten better stuff, but I wanted to save the 30 bucks.

Check the chips as lots of Kingston Value RAM had Winbond BH-5's on them. I just aquired some and the RAM does the 245FSB 11-2-2-2- @ 3.1v's

ram at 3.1v ??? will it shorten its lifespan alot ???

 

[LED]

Check the RAM 1st as you wanna make sure they are Winbond BH-5 or 6's. You can cool them or run them with less v's 2 a slower FSB, up to you and how do you dshorten the lifespan of RAM with a Lifetime warranty? Use common sense and keep it cool as possible.

 

[Ketchup]

With the multiplier locked at 11, I can do 200 in DDR dual-channel mode and 220 in single channel mode. You can blame integrated video for that though. If I feel like getting a stand-alone video card down the road, it would be nice to see what this puppy can do.

 

[hytek369]

LED, what is the steppings on your processor?

 

[LED]

Originally posted by: hytek369
LED, what is the steppings on your processor?

AQXCA 0314MPMW

 

[Megatomic]

Good job LED. I've had my 2500+ up to 220MHz FSB before, I ought to try again for a higher FSB tonight.

 

[pspada]

Originally posted by: LED

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

It's got to be a bitch trying to run that red marble case machine without a video card?

 

[InlineFive]

Originally posted by: pspada

Originally posted by: LED

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

It's got to be a bitch trying to run that red marble case machine without a video card?

 

[Evdawg]

Originally posted by: PorBleemo

Originally posted by: pspada

Originally posted by: LED

Originally posted by: hytek369

Originally posted by: LED
I'm had it stable @ 240X10 but run 230X10 and have personally tilted the scales @ 263FSB

what mobo you running bud?

bud it would be a slightly Modded DFI Infinity in 1 Red Marble Case

It's got to be a bitch trying to run that red marble case machine without a video card?

Yea can i have your case?? kthx

 

[LED]

LOL...actually, I've read where someone has hit 280FSB on a non-Barton and Infinity :Q

Anyways (yea I know the Monitors not hooked up )...

It's got to be a bitch trying to run that red marble case machine without a video card?

There you go, better now? and yes I know, it has no Power cord or Monitor hooked up but hey it's Modeling