High vcore reading on Iwill KK266 boards?

[rocketbubba]

Typically the vcore reads roughly .08v higher than the bios setting. I have a T-Bird 1.4 and it was running hotter than I wanted so I checked the vcore setting. The bios was set to Auto and the chip was running at 1.84v. I set the vcore to 1.65v and got a 1.73v reading in return. Is this typical of this type of board?

 

[rocketbubba]

Anybody?

 

[panhead49]

yes this is normal.............my board is the same way........give or take a few

 

[rocketbubba]

That's what I figured. In any case, lowering the vcore did lower my cpu temps by about 5 C, which is what I had hoped for.