help with ocing my duron600

[Cable]

ok, i have a7v motherboard. it is the version with the jumpers next to the ata cables. i first did what someone told me to do, which was up the v core voltage up to 1.85 and reboot and go into windows, then shut down. i put the voltage up to 1.85 but could not get even to a bios screen. i shut it off, turned it back on, went into bios, and the vcore voltage was at auto again. i got it at 1.80 and it booted into windows, i shut it off, and put the 5, 6 jumpers on, then put the 4 jumper from the 1-4 jumpers on to try and hit 650. no luck. it just beeps at me about it being too hot. someone please let me know what i am doing wrong. i pencilled in the l1 bridges really dark, and they are not touching each other. help me out fellow anandtech'rs!

 

[HecDTec]

Did you disable the jumperfree jumper on the corner of the board. That jumper and 5&6 have to be set a certain way for the multiplier to work. RTM (Read the manual) This is the first thing you should do before starting.