Help with MSI 6905 Master version 2...

[Pygmy]

I need to know the jumper settings for this slotket. I've been searching for hours and can only find the settings for version 1 and version 2.1 and they seem to be different.

Let me know if you can or send me the pdf or whatever.

Thanks so much anyone that can help.

 

[JmsAndrsn]

You using that on your PIII 1G??

I believe I've got a v2.3 but maybe the settings are the same. The settings are on the box so I don't have anything that I can actually send to you. Try these setting though.

FSB selection: J1 & J4 are used to select FSB. If you want to set it for 133 MHZ, leave all jumpers off. If you want to set it for auto, you need to short both pins on J1 and short pins 1-2 on J4.

To indicate that you're using a coppermine CPU(rather than one of the original Celerons) you will need to short pins 1-2 on J3.

Voltage selection: I will give you these settings in the following order: JV0, JV1, JV2, JV3, JV4

Auto: 1-2, 1-2, 1-2, 1-2, 1-2
1.7V: 2-3, 2-3, off, off, off
1.75V: 2-3, 2-3, off, off, 2-3
1.80V: 2-3, 2-3, off, 2-3, off
1.85V: 2-3, 2-3, off, 2-3, 2-3
1.90V: 2-3, 2-3, 2-3, off, off
1.95V: 2-3, 2-3, 2-3, off, 2-3
2.00V: 2-3, 2-3, 2-3, 2-3, off

Hope this works. Let me know if that slocket is more stable for you.