I just purchased a second Dell 18" LCD and hooked it up as my #2 dual monitor using the analog outlet of my Ti4400 (VisionTek) and nView. Driver is installed, native resolution. However, there is a distinct moire-like, falling rain pattern visible, rather like rain on the screen in the background for a few seconds after opening any new window on the display. Otherwise the display is fine. I changed the video cable; that did not fix it. I used autoconfigure; that did not fix it. I switched the analog cable over to my #1 monitor that I had been running with DVI and sure enough the moire pattern is on that monitor also. So, it is NOT the monitor; it is the analog output of the card. I reloaded nVidia drivers, made the new monitor my primary, analog monitor, all alone on the card and the streaking, background pattern is still there, just like a moire pattern (which of course is not possible on an LCD). My next step will be to try a second LCD on this card. But, while I am doing that, please let me know if you have ever seen this problem before.
Is this a poor signal coming from my analog outlet from my Ti4400. The digital signal is perfect. Thank you in advance.
Is this a poor signal coming from my analog outlet from my Ti4400. The digital signal is perfect. Thank you in advance.
Facebook
Twitter