help with lin-lin and celeron1.3 please

[bardos]

Hi,
I have a problem with this config. First of all the mobo is an asus cusl2, it boots fine with a tualatin celeron1.3ghz cpu and an upgradeware 370 tualatin adaptor. So the mobo, hard drive, video card, memory and keyboard are fine.

Bios settings are for 1.5v and 100Mhz no overclock.

Enter the Lin-Lin adaptor with another Celeron 1.3 which I just took off of an upgradeware slotI adaptor I'm using on an Asus P2b, so this cpu is also good.

I have the Lin-Lin set according to the instructions on the box with two jumpers, one on A5-A6 and the other one on B8-B9.

I get the whir of the cpu fan, green light on the floppy, boot noises from the hard drive and a black monitor screen. But it doesn't boot after that.

Can anyone who has experience with this adapter give me a tip?

please.

thanks, eric

 

[INemtsev]

in other words wont post....increase more voltage

 

[bardos]

hmmm.... i tried with the lin-lin set to 1.6v and still no post.

 

[bardos]

Got it to boot with a different jumper config. Bios options are 1.3 -1.55v. I'll need to do some more experimenting.