Help with Leadtek K7NCR18D and LSI SATA RAID card

[damonpip]

Hi, I just bought a LSI Logic 2 port SATA RAID card from newegg, and two 80gig seagate drives to go along with it. After setting up the array in the card's BIOS, I booted off my XP cd (which has SP1a integrated). I pressed F6 and loaded the drivers for the card, but it did not find any hard drives. Next, I reinstalled my old hard drive and booted into XP. It detected a RAID card, and I installed the drivers (newest from their website, but they wre not digitally signed for some reason). After rebooting, device manager said that the card "could not start (code 10)". Any idea what the problem could be??

 

[jkresh]

having the exact same problem with my card, though as how to fix it i have no idea

LSI Megaraid 1520
WD 200JD

motherboard is asus p4b-533E

 

[jkresh]

well it is a driver issue, WD's site has drivers for the silicon image card (same chip as in LSI's), downloaded those and updated drivers and it detected my drive, not sure if it would work for your raid setup but it is worth a shotSIIG