Help with ECS l7vmm3 bord

[BigBooRRTX]

evrehting on the bord works nice, untill i put an old g-force 3 ti 500 in it. the card works in one computer but not the ecs. in the bios there is no way to turn off the on bord vid and just use the agp slot. when the computer starts it just beeps a fue times, with no pickup on screen, the screen gets power but no display of boot up on eather the agp card or onbord vid, as soon as i pull card out it works fine with the onbord. anyone have any ideas or know whare to find the beep codes for ECS bords?


thanks

 

[johnjkr1]

Welcome to the forum! Normally, when you put in an AGP card, it should override the onboard video automatically. Some bios's have the ability to choose primary display as PCI or AGP, so you might look for that. The manuals are available here, they should contain a listing of the beep codes:

http://www.ecsusa.com/downloads/manual.html

Also, you might want to make sure you have the latest bios for your motherboard.

 

[BigBooRRTX]

thanks alot john, ill will try looking agen, and i did upgrade the bios, will let you know if there are any changes


thanks