Help With Asus P5B Dlx

[willbemcse]

I have P5Bdeluxe with E6600 and OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) . The board wont boot so I had to increase the voltage to 2.0 v everything fine after doing the bios update through asus utility the board wont boot up.

There is a blinking cursor after the asus logo, should I clear the cmos or the memory is not compatible with this board , the bios version now is 0804.

 

[keeleysam]

Clear yuor CMOS.

 

[willbemcse]

I already did that cleared the cmos, checked all the connections there is still blinking cursor on the screen. What could be causing this blinking cursor with blank screen , is it a power supply issue (Antec TruePower Trio 650) or board is not compatible with OCZ Platinum