help! vp6, 800cco, all of sudden wont work!! vp6 owners help!

Trask97140

Banned
Dec 3, 2000
129
0
0
ok,
my 800 cco will post at 940 no prob.
so then i decided to go higher.
this chip was also at 1ghz as i bought from compuwiz1.
so i fiugred i could get higher aswell.
the temp when i raised it stayied the same at a fsb of 120.
then went to 124fsb and doesnt work.
just a black screen monitor!
light on board still work, everything else boots up...
is there like a jumper to set the fsb or cpu back to default.
btw i never set the voltage any higher...
let me know!!
please!
 

rockstar

Member
Sep 3, 2000
66
0
0
www.chaoticgroove.com
Hi,
The board should have a way to reset it. On my mobo, you hold down insert while powering up to reset the cpu settings. Otherwise, you can just take the battery out to reset the entire BIOS. Good luck.
 

OverclockMe

Senior member
Nov 15, 2000
349
0
0
On my abit BE6-II when I go to high on the FSB and crap begins to happen. Sometimes really scary stuff, Just hit the power on and off a few times and also flip the PSU power switch too then it resets it self, also when it turns on, I forgot what button but before bios loads ups hold alt or something and it resets the bios, oh well good luck!
 

Trask97140

Banned
Dec 3, 2000
129
0
0
what about on the vp6?
if i remove the battery?
also the nic card light turns on and the board red light turns on, so it must be working right?
and the chip gets hot so there is power must be...
so howe do i reset the chip with going into the bios??
 

ChrisOh

Banned
Oct 17, 1999
910
0
0
You cant reset the chip in the bios if you can't get into the bios in the first place. Just take out the battery for a minute or two to clear all your settings.