• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

help to fix raid 0 scratch disks

S

supaidaaman

Senior member
I installed a 2tb drive to backup my 640gb x 2 raid 0...and when I rebooted my bios gave me a "raid failed" screen. :*(

Drives are on intel raid controller ich10r (evga x58) black ports--

Intel Rapid storage is showing the 2 drives, but no longer in raid.

Windows is showing the full raid 0 in disk management

I cannot enter my ctrl-I raid management after the bios screen because it flashes by in a millisecond. No amount of insane pounding can get me to that screen. Ive tried unplugging and plugging in blank drives to get the raid manager up again, but it always flashes by.

This makes me think that the on board controller fried.

Is there anything I can do with the partition in windows?
 
Change the option in the bios for fast boot to no, and hopefully you will have an easier time getting into the raid bios.
 
No fast/slow boot options on here...
Ive tried hooking the raid into another x58 board (intel DX58SO)
But it doesnt have any raid prompt in the bios unless i change it from AHCI :*(
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top