Help!!!! Problem of Celeron D overclocking

[wahaha2005]

Celeron D 320(2.4G)(E0); FSB : 133; MB: Epox 4PDA6I(865PE);

I want to overclock FSB, from 133 to 200. MB is not good to do it.

Then I want to change the CPU pin , Let the CPU be 200 FSB.

But I do not know which pins should I connect.

Who can help me ?

Thanks!

 

[wahaha2005]

No one Know it ?

 

[wahaha2005]

Help!!!!!!!!!!!!!!!!!!!!!!!

 

[MemoryInAGarden]

These chips are a breeze to OC. I don't know any pin mods, but Epox boards are generally halfway decent.

 

[mindwreck]

I had the cele-d before i got my semrpon. Overclocking it is as uping the fsb. I got my 2.8ghz up to 3.3 on a ECS(yeap ECS). I'm pretty sure you'll have better lucky than me

 

[Haxorious]

The best Overclocking Celeron is the CELEROn D 330J on non J.
The 330J is for 775 Platform Motherboards and the 330 non J is for mPGA Motherboards.
The celeron 330J is on 2.66 Ghz with A voltage of 1.33 Volts
to oveclock it to 4GHz you will need:

A motherboard like Abit AG8, DDR400 ram...or even better DDR 466 Ram and a cooler from Thermaltake like the Thermaltake Big Typhoon or Thermaltake Sonic Tower
You will need to overvoltage the Cpu at 1.47 Volts and set a DRAM ratio of Sugessted 1.1
if that doesnt work try 5.4
A litle overvotlege of the ram would hurt.....try to volt it at 2.6 or at your own risk 2.7
THATS IT

I take no responsbility if anything happens to any SYstem.... iJust give Advice.....i my self hace a Celeron and Will make it a 4GHZ celeron in a Week or So