Help overclocking DFI LANParty UT nF3 250GB

[keviheit]

Hi All,

My system is running ok, but I'm not sure if my settings are ok. Is there anything else I can change? Can someone help me optimize it?
I have:
Athlon 64 3400+, DFI LanParty UT nF3 250GB, 2x 512GB Corsair (2.5) PC3200.

Here is what I have now:

FSB Bus Frequency: 244
AGP Bus Frequency: 67
LDT/FSB Frequency Ratio: 3
CPU/FSB Frequency Ratio: 10
CPU VID Control: 1.425
CPU VID Special Control: 110%
Chipset Voltage Control: 1.7
AGP Voltage Control: 1.6
DRAM Voltage Control: 2.8

DRAM Frequency Set: 180 (9/10)
CPC: Disabled
tCL: 3
tRCD: 4
tRAS: 10
tRP: 4
tRC: 15
tRFC: 17
tRRD: 00
tWR: 3
tWTR: 2
tRTW: 4
tREF: 4708 166 (1.95us)
tWCL: Auto
DQS Skew: Increase
DQS Skew Value: 64
DRAM Drive Strength: Level 1
Max Async Latency: 8
Read Preamble Time: 6
Idle Cycle Limit: 32
Dynamic Counter: Auto
R/W Queue Bypass: 16
Bypass Max: 4
32 Byte Granulation: Enable (4burst)


Thank you in advance for your help

 

[cuti7399]

tighten your ram timings

 

[keviheit]

how do i tighten my ram timings?

 

[imported_Computer MAn]

Try setting the tCL to 2.5 and see if it boots.