Question Help Need Bios for GA-H61M-S rev 1.1

Cris117

Junior Member
Mar 30, 2023
1
0
6
Hi sir last week I updated my bios with @Bios I had bios version f3 with @Bios I got F4 after new Bios installed I'm getting huge problems whenever i shut down my pc and later when I start system its not booting at all just black screen with no display on monitor. I had to off with with power off button and power button on again after 1, 2, or 3 times system boot with 2 to 5mins booting time, I remember in @Bios it shows I got Bios f4 it was for GA-H61M-S Rev 1.0 so I think i'm having issues with new Bios i try to get old Bios from Gigabyte there is none for rev 1.1 Please someone can help me and give me Bios for GA-H61M-S rev 1.1 Sorry for my bad english please help me.
 

Attachments

  • 337933140_2620179168121936_6840047206965450781_n.png
    337933140_2620179168121936_6840047206965450781_n.png
    198.8 KB · Views: 3

Mantrid-Drone

Senior member
Mar 15, 2014
347
43
91
I'm no expert on BIOS in any way so triple check it is correct for your MB and wait for further advice/confirmation but I did a quick search and came up with this page:-

https://www.gigabyte.com/Motherboard/GA-H61M-S-rev-1x/support#support-dl-bios

If it is correct for your MB it has BIOS downloads for both the v2 first release and v3a, which maybe what you were using before.

This is just FYI (for your information): do not try to re-flash the BIOS without getting more advice.

I should have also mentioned that you may have a backup copy of the BIOS on the MB for problems just like this. But I think that enabling it will only reset back to the original factory BIOS (v2?) not the previous one.

Gigabyte also recommend that after any BIOS updates you should:-

"Load Optimized Defaults

Press <Enter> on this item and select

Yes to load the optimal BIOS default settings. The BIOS defaults
settings help the system to operate in optimum state.

Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values."

Again I am not advising you to do this it is just FYI.
 
Last edited: