specs
tyan s1854c
p3 700 gf2 gts 32mb
2 20GB 7200RPM HDD's (One fujitsu that's acting up, and an IBM Deskstar that is the C
rive that is working right now)
512mb ram
aureal vortexsq2500
DVD-RW and CD-RW
linksys LAN 10/100
I was moving stuff around in my case, changing 3.5" drive placements from one drive cage to another, and adding in my new DVD-RW. When I restarted my computer with everything I thought was ok, my video didn't show up. I changed PSU's, and now the video works, but neither HDD shows up. I had changed my jumper settings, so I set those up correctly now. The drives were barely 5mm away from eachother (they're right next to eachother in a very small 2 drive cage). When I restarted and I thought everything worked fine, all of the sudden when I go into my computer and try and open up the D: drive (my 2ndary HD), it says drive is not formatted, would you like to format it now/ and I right click on the drive click properties, it says 0bytes everywhere, and there's nothing on it and it can't be accessed. I've since changed drive cages so the drives are further apart, and this problem exists! Help!:|
UPDATE-----------------PROBLEM SOlved! jumper issue
tyan s1854c
p3 700 gf2 gts 32mb
2 20GB 7200RPM HDD's (One fujitsu that's acting up, and an IBM Deskstar that is the C
rive that is working right now)512mb ram
aureal vortexsq2500
DVD-RW and CD-RW
linksys LAN 10/100
I was moving stuff around in my case, changing 3.5" drive placements from one drive cage to another, and adding in my new DVD-RW. When I restarted my computer with everything I thought was ok, my video didn't show up. I changed PSU's, and now the video works, but neither HDD shows up. I had changed my jumper settings, so I set those up correctly now. The drives were barely 5mm away from eachother (they're right next to eachother in a very small 2 drive cage). When I restarted and I thought everything worked fine, all of the sudden when I go into my computer and try and open up the D: drive (my 2ndary HD), it says drive is not formatted, would you like to format it now/ and I right click on the drive click properties, it says 0bytes everywhere, and there's nothing on it and it can't be accessed. I've since changed drive cages so the drives are further apart, and this problem exists! Help!:|
UPDATE-----------------PROBLEM SOlved! jumper issue
Facebook
Twitter