Help. Multiplier problem/question

[darth_beavis]

I'm trying to unlock my CPU so I can use a 133 FSB. However my unlocking has met with limited success. I now have a CPU that can run at either 10x or 9x multipliers. the other multipliers settings I've tried give me a blank screen at bootup. Apparently I didn't connect all the L1 bridges correctly but I'm trying to figure out which ones I did. Does anyone know which ones I've closed based on the fact that I can run at 9x but not 7x 7.5x 8x or 8.5x?

I've looked at several sites that try to go into detail on this kind of stuff but they just confuse me because they have odd graphics and start talking about L3 and L4 and BP_FIDs. 😕

I have an Abit K7A-Raid and originally a 1Ghz athlon.

 

[Dexion]

Remove the L1 connections and reconnect it with a graphite pencil again. Don't cross the connections! Connect the dots
: : : :
| | | |

However don't cross over and connect them all.

 

[darth_beavis]

I used a conductive pen. The stuff doesn't seem to come off with nail polish remover.

 

[darth_beavis]

What happens if there is cross over?

 

[johncar]

Try to diagnose using simple setting algorithms at http://members.nbci.com/candjac/index.htm Duron OC article.
John C.