help me trick bios

[Symcy94]

I just got motherboard from dc7700 PC, and it's so annoying because I don't have original case and all other components.
So every time I start/restart PC, I have to wait a bit and then press F1.
The problem is that I usually use remote desktop or team viewer to work on updates etc. and if restart is required, PC won't turn back on without someone pressing that damn F1 button.

So is there any way to trick bios to stop checking for those not connected devices or something.

here is screen of what happens 10sec after I turn on PC:

 

[Burpo]

Nope.. Nothing short of using the original case, or attaching the front panel stuff to clear the errors.

 

[alkemyst]

You can just put a pin jumper for the first two more than likely and then stick a free thumb drive in for the third or just any usb device.

 

[Micrornd]

The only way to make this go away on your HP MB is -

1 & 2. Buy this component from any vendor http://www.ebay.com/itm/HP-Compaq-D...226?pt=LH_DefaultDomain_0&hash=item258e07a37a, plug in, adapt wiring harness to your case or leave the unit inside case if no other solution.
3. Plug in any chassis fan

DO NOT use jumpers, nothing on those headers is ever meant to be shorted out.

 

[YBS1]

Is there not a disable halt on errors setting in the bios?

 

[Micrornd]

Is there not a disable halt on errors setting in the bios?

Nope, not for those errors in any HP OEM board bios, only pressing F1 after the error appears.
The boards were designed to only be used with their respective HP OEM cases, and those cases have that "stuff" in them.
Only connecting them correctly makes the error and stopping go away.