• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Help me get that warm scsi feeling inside...

Syborg1211

Diamond Member
Ok so I think I've finally convinced myself to go scsi. The price isn't that big of a deal though the lower the better. I do know some about scsi but not nearly as much as I'd like so just treat me as a newbie though I'm not. I'd like to know what the good drives out there are, what good cards, and I dont know about the different kinds of connections?

How about recommending two good setups - a good performing but good good value and a good performing but a tad more pricey. Heck, what's also the best setup I can get?
 
Here are some things to remember:

-Buy LVD, not SE
-Controllers are mostly 68-pin. 80-pin drives are cheaper but need expensive adapters or SCSI enclosures
-You need termination at each end of the cable
-Controllers and drives are all the same to SCSI
-Cheap cables only get you problems
-The adapter is usually ID7
-The adapter is a terminator
-Some drives can terminate

Easy SCSI:

LSI U160 Single Channel controller: $42
Seagate 15K RPM 18GB (ST318453LW -X15 ): $195
Cable: $20
Terminator: $15

That will get you good performance. I have the same thing except for I have a 10K drive instead of 15K. The drives get very warm and can be louder than IDE. That controller won't do RAID, and it's 64-bit. You can use it in a 32-bit slot though. If you only have one device, it doesn't *really* matter, except for the fact that it's sharing the bus with everything else.

Expensive SCSI:

LSI Logic MegaRAID SCSI 320-1: $359
4xQuantum Atlas 15K 36GB (8C036J0): 4*$339= $1356
Cable: $20
Terminator: $15

Put those in a RAID 10 config. It'll scream (literally)

I'm no SCSI expert though, so maybe someone with more experience can provide better alternatives/info.

 
The two top-performing drives appear to be the Maxtor/Quantum Atlas 15k and the Fujitsu MAS-series. I saw an interesting note on the LSI Logic $42 card at Newegg: evidently you can't set up WinXP from scratch on it, which is just strange when you consider that Win2000 has this card's drivers built-in 😕

I would lean towards Win2000 and you may get best performance by converting your drive to a Dynamic Disk in Windows Disk Management (easily done, takes a couple clicks and two reboots).
 
Originally posted by: mechBgon
The two top-performing drives appear to be the Maxtor/Quantum Atlas 15k and the Fujitsu MAS-series. I saw an interesting note on the LSI Logic $42 card at Newegg: evidently you can't set up WinXP from scratch on it, which is just strange when you consider that Win2000 has this card's drivers built-in 😕

I would lean towards Win2000 and you may get best performance by converting your drive to a Dynamic Disk in Windows Disk Management (easily done, takes a couple clicks and two reboots).

That's a bunch of crap about the XP thing. I noted that in my comments on the card. I don't know where they got it from. I've done it twice.

Maybe Newegg is crazy.... 😕 😛
 
Originally posted by: mechBgon
Thanks for the reality check Chaotic42! 😀

😉

You know I wasn't griping at you, right? I always worry about stuff like that.

The chip is just a really common Symbios chip. Linux 2.2 has it enabled by default, and so does Windows XP. You don't need to push F6 at the beginning or anything. I was relived. I thought it would be a nightmare!

🙂
 
Definitely get the Seagate 15.3K...nice drive :beer:
Adaptec, Tekram and LSI are all good controllers, match any of those to that Cheetah and you'll be set.
....and yeah, make sure the drive is 68-pin...don't even mess with 80-pin and adapters.
 
Originally posted by: Chaotic42
Originally posted by: mechBgon
Thanks for the reality check Chaotic42! 😀

😉

You know I wasn't griping at you, right? I always worry about stuff like that.

The chip is just a really common Symbios chip. Linux 2.2 has it enabled by default, and so does Windows XP. You don't need to push F6 at the beginning or anything. I was relived. I thought it would be a nightmare!

🙂
No offense taken, I'm glad to hear that it does work 😎

 
What controller would I use if I wanted to raid two of the seagates together? How's the performance boost from raiding them? Should I just get 1 36gb en lieu of 2 18's?
 
ClubOC RAID0's some Cheetah 15k.3's on a 64-bit 66MHz single-channel Adaptec 29320-R: Bib required! 😀

93000+ HDD score in Sandra (if anyone even cares)
130Mb/sec+ sustained throughput, peak (32-bit 33MHz PCI maxes at an effective 120Mb/sec)
Sub-4-millisecond average seek, 0.2ms track-to-track seek
Command queueing
Fluid bearings
5-year warranty

and the Fujitsu MAS's are faster yet :Q I found out the Fujitsus do have fluid bearings, but StorageReview finds that they put out more noise than the 15k.3 does: SR review

If it were me, I'd go with two standalone 18Gb drives, not in RAID, with identically-sized pagefiles on each. You can read from one drive while writing to the other, and Windows will have two pagefiles to choose from for efficiency.
 
Back
Top