Help Me Gain a Higher OC Pweez :-D

[larry89]

Right Now

Im Running my Athlon 64 3000+ @ 265x9 (2385MHZ)

1.488 Voltage


My Ram is OCZ Platinum Rev 2 @ 2.84Dram Voltage 2.5-4-3-7-11
Running at 1:1 1T

265Mhz
2.5 tcl
4 trcd
3 trp
7 TRAS
11 trc

256 Dram idle timer ( the hell is this??)


Any suggestions on anything I can do to gain a higher OC? Im currently Idling at 25-30C load at 40-43C

IM on a Dfi Nforce 4 So should I know of any sort of "best" timings since im running an Athlon 64?

Any Help Appreciated, Thanks

 

[MDE]

You could try running a memory divider (probably 166) and get the HTT speed up a bit more.

 

[thekarney]

wow dude, thats really high voltage for a winchester, I am running 2.612 at 1.49-1.5volts. You might wanna throttle back a bit on the vcore.

 

[Doctorweir]

Whoops...mine has to eat 1.6v...but I think he is fine, though...as long as the heat is moderate... 😉
But also wouldn't try above 1.6v... 😛

 

[thekarney]

think you need to change your sig to DDR550 2.5-3-3-8-1t doctor weir

 

[Shimmishim]

also, try lower voltage for your memory....

you shouldn't need 3.1 to get 265

even in anand's review they only used 2.85 to get past 270 i believe...

make sure you have a fan blowing over them (TCCD's get VERY hot)...

also be sure to memtest and prime to check stability

 

[Doctorweir]

Originally posted by: thekarney
think you need to change your sig to DDR550 2.5-3-3-8-1t doctor weir

?? Why that? It's Corsair XMS3200 rated 400 running @ 418 with best timings...
Or do you suggest running @ 1:1 (aka DDR500) with the timing you propose? May be an option, but in the first tries this sticks were not very stable, so I kicked in the divider and maxed the timings... :frown:

 

[larry89]

Well i got a 503 Winchester, I'll try lowering the voltage and I'll see if I can raise the fsb using a divider.

Oh yes, one more thing thats always confused me, IS a divider considered a 2t command rate since it is not running 1:1 with the cpu?

 

[brazzmunk]

Originally posted by: thekarney
wow dude, thats really high voltage for a winchester, I am running 2.612 at 1.49-1.5volts. You might wanna throttle back a bit on the vcore.

his voltage is ok.. maybe it even needs abit more juice..
i'm running 1.55@2.6 and i barrely get's over 48..
the limit i think is arround 1.6-1.65

 

[larry89]

Wtf. I fail prime in 1 minute at 2.9 or 2.85 voltage with my timings and oc

it was fine at 265 @ 3.08 now it fails superpi at 3.08 now...

It is fine on memtest passed 3 loops but not fine on prime or super pi..

wtf