HELP: KK266-R Front Panel Installation

[Dhanu]

How do I figure out which way the connectors go onto the mobo? There's nothing about this in the manual. They tell you which pins are for each LED etc. How do I figure out which side of the connector is the ground or anode etc... so that I can align it with the right pins? Please help

Thanks,
Dhanu...

 

[foofoo]

hi,
it doesnt matter for the power switch or the reset switch.
for the others, just try one direction and if it doesnt light, reverse it. i know this sounds a bit dodgey, but you wont hurt anything if the ide or power leds are backward, the led just wont light.

 

[GremlinHater]

Just got the same board and ran into the same problem, the manual has a "sketchy" diagram of the connections, you just need to count of the pinheads, I finally figured it however I will tell you that I believe all the connections face the sameway EXCEPT the HDD connection which is reversed as I found out, if you have any more problems, PM me.

Edit: I believe the majority of the connections, the text side faces outward as I figured that be the common sense way to do it. Anyways, good luck.

 

[hairygit]

I just got this sucker up and running.
Moved like a fast cheetah with the wind behind him.

Unfortunately - after 30 minutes of windows, everything ceased. No LED, no fan no nothing.
If you have any ideas, please email me or pm me.
hj1234@go.com

Cheers, and good luck,

It was good while it lasted.