Help....IWill XP333...jumper settings

[CzarChasm]

Im building my first sys from scratch with:

Iwill xp333 v2.1
256 OCZ PC2700 DDR
Aopen Gforce2TI 64
Maxtor 60GB 133/7200

What out of the box jumper settings should i use for max stable performance? Specifically the core voltage (2.5v, 2.6v, or 2.7v)

I would GREATLY appreciate any input
Thanx
-cc-

 

[Frosty3799]

hey i just got mine set up about a week ago (in my sig for specs)

umm those votlage adjustments on the motherboard are for the ram. i would suggest putting them both on pins 2-3 so you get 2.8v going to the ram.. thats the setting i use, and system is nice and stable, its been up for 3 days straight now, no problems, no slowdowns, and passes prime95 like a champ.

for the CPU voltage, the adjustments are in bios on the same page as all the multiplier settings, fsb settings, etc. i have my voltage at 1.8 right now, and my temps w/ a thermoengine are about 40 idle and 45 full load.

what CPU are you using, and is it unlocked?

PM me if you have any other questions.

Josh

EDIT: PM is private message, and to enable your private messages, click on profile, and you will find the option in there.

 

[rbV5]

<< i would suggest putting them both on pins 2-3 so you get 2.8v going to the ram >>



Thats where I'm at as well (undocumented), also I have my Core v set to Auto in bios and my Tbird is purring along nicely 24/7 at the settings in my sig. 41/47 idle/load.