Help, I can't login to my new Linksys router??

[robisc]

I have a new WRT54GX2 that is working OK as far as LAN browsing or internet connectivity, but I need to access the web based config via web browser at IP 192.168.1.1 but I can't get to the login screen, any ideas, I have tried multiple browsers, multiple machines and I don't haveany software firewalls. Any ideas before I have to contact Linksys?

 

[bruceb]

If you just type: 192.168.1.1. in your browser you should get to the router
The default Login is: Admin .... the default password is left Blank

 

[hytek369]

ugh, i had the same problem, wasnt able to solve it

 

[iluvtruenos]

SN: Admin
PW: Admin

192.168.1.1

Should work. Are you sure everything's plugged in where it should be plugged in?

 

[tweekah]

powercycle router, do an ipconfig, type in your default gateway in your browser. If you don't have any real settings you need to save (ssid, port fowards, mac filtering, wep/wpa keys), hard reset it with the physical button and it will put it back to factory default settings. Good luck.

 

[orion23]

Wow, I just had the same problem with mine.
I would get the login screen, but after entering the password I would just get a blank page.
I unplugged the router for about a minute and it worked again.

 

[robisc]

thanks for the replies, but to clarify I don't get to the login screen, and yes I am using the correct IP as I noted in the original post. I have reset it and done everything else I know to do.

 

[ColKurtz]

Make sure you update the firmware. I have a WRT54G (x3?) and had all kinds of problems with it until I upgraded. I'm at 4.20.7 now and running fine for months.

 

[robisc]

I can't login in order to upgrade the firmware, nonetheless the problem is solved with a new router, thanks for all replies.