I just installed my digi docII & wasnt sure where to place the probes. I put the odd probe(there was 1 that was flatter than the other 3) real close to the core of the cpu, if not on it.
My case is off for my GFD but heatplate is still
intact, so I managed to get the probe between the heatplate & core. It is touching the thermal paste. So Is this where it should be? If so is it dangerous for the temp(123f idle) to be this high?
What should the temp be for a T-bird 700@900 2.00vcore with plenty air cooling? Also where should the probe go on my geforce 64mb? I have it right under the heatsink up against the chip.
The temp is 106f idle, card is o/c to 235 core/ 385 mem.
The case temp(inside) is 84 in midday here in Cali where its hot right now!
System:
T-bird700@900 2.00vcore
k7m mb bios 1009
prophet geforce2 64mb
mx400
250psx(I know I need more!)
lots of air cooling-tornado1000 with extra fans
10xDVD=40xrom
Duel boot-98se & win2k pro
Please reply
My case is off for my GFD but heatplate is still
intact, so I managed to get the probe between the heatplate & core. It is touching the thermal paste. So Is this where it should be? If so is it dangerous for the temp(123f idle) to be this high?
What should the temp be for a T-bird 700@900 2.00vcore with plenty air cooling? Also where should the probe go on my geforce 64mb? I have it right under the heatsink up against the chip.
The temp is 106f idle, card is o/c to 235 core/ 385 mem.
The case temp(inside) is 84 in midday here in Cali where its hot right now!
System:
T-bird700@900 2.00vcore
k7m mb bios 1009
prophet geforce2 64mb
mx400
250psx(I know I need more!)
lots of air cooling-tornado1000 with extra fans
10xDVD=40xrom
Duel boot-98se & win2k pro
Please reply
