HELP! Can't get past 3.2....first time overclocker

[kurosharp]

Hey everyone, I'm a newbie to overclocking and I appreciate these forums for helping me so far. I've succesfully overclocked to 3.2ghz with my e6750 on a p965 - ds3 3.3 with 2gb OCZ ddr2 800 ram. My entire rig is in my siggy. I have tried increasing voltages all the way to 1.4500V but at 8x425 I still can't get my system to boot. Any suggestions? It'd be appreciated.:brokenheart:

 

[cmdrdredd]

memory...everyone always forgets that your memory will be overclocked too. you need to relax the timings if it's not working. Try 5-5-5-15 then maybe more voltage. Make sure you have the ratio set correctly too.

 

[SerpentRoyal]

Set Vdimm to 2.2V, 1:1 memory ratio with 5-5-5-18-2T timing, and Vcore to 1.48. Run memtest86 (test #5 for 20 minutes). If okay, then raise FSB by 3MHz and retest. If okay, then boot to windows and test for 10 minutes under Orthos Large mode.

 

[bryanW1995]

your rig is not in your sig. Man, I thought that I was having e6750 problems... an e6600 is probably better on a p965 mobo imho b/c they don't seem to be quite as fsb-friendly.