Having Trouble With AMD64 s939

[lostpnoiboi]

ALriight here is my friend specs:

CASE: Thermaltake Xaser V Damier series
CPU: 3000+ AMD64 s939
MEM: Geil 1gb Value Duel Channel (with blue heatspreader)
CPU Heatsink: Thermalright XP-90
PSU: Fontron 400watts
Vid Card: 6600GT AGP 128mb
MOBO: ABIT "AV8" K8T800 Pro
120gb WD IDE Hard drive
CD-rom 52x

Here's my problem, This is my 2nd time having to built his comp. The first time was that some of his compenent was defected and had to RMA'a through Newegg. This time i was able to get pass through the post screen, and i was able to Install Windows, but During my installation of windows i had Beeping. This beeping is continouses and annoying. I have tried several ways ideas, thinking its either one of each. One of them was that I Used my 550watts AntecTruPower PSU. That didnt stop the beeping. I notice on its Post code display "28" i think somewher around that. I also refreshed the Cmos and that didnt work. If anyone has information or has simliar situation. Please Let me know.

 

[KGB]

The beeps are a coded message from the BIOS telling you what is wrong.
Look in the MB manual for a list of the beep codes or do a Google.

 

[acivick]

Is it one continuous beep or many? If it's one continuous beep it's possible that the molex power connector is not connected to the video card or that the additional 4 pronged connector is not in the motherboard. Although, I'm not entirely sure you would be able to install windows in either case, unless they got disconnected midway through. But yeah, if both are connected properly, look up the error code.