Having issues posting at 133fsb on a Soyo Dragon Ultra Platinum kt333

stonecold3169

Platinum Member
Jan 30, 2001
2,060
0
76
hey all. I just swapped system parts out, and salvaged my athlon tbird 1.4 from my old Abit KT7a-RAID. I had unlocked it with the pencil trick and ran it flawlessly for a couple of months in the old board, so I figured no problems with the new one, right? Well, not quite. The board will let me post at any multiplier with a 100fsb, but not at 133. I've tried erasing and reconnecting bridges several times, but to no avail. I'm using the newest bios release, and nobody else seems to have this issue. When I switch to fsb 133, I get no display and no post beep. Anyone have any suggestions on what to do with this picky board?
 

stonecold3169

Platinum Member
Jan 30, 2001
2,060
0
76
it's originally a 200fsb tbird, 200x14 multiplier, but I unlocked it and have tested it again on a kt7a raid board and it's definitly able to be run at 133x 10.5
 

MithShrike

Diamond Member
May 5, 2002
3,440
0
0
The board may be, as you said, picky so I'd try a lower FSB than 133... LOL who knows? That's some weird shix but man you ain't seen my Uncle Jeff :D
 

techietam

Senior member
Jan 29, 2002
774
0
0
I think, it's a mobo not able to run this processor @ 133, although
CPU is able to. I give you 100% that any 133FSB CPU will run just
fine. I've ran into this a number of times already :(