• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Haswell tempatures

K

k3ack3r

Junior Member
Hi, I have a Hyper 212 Evo with a i5 4670K at 4GHz and I'm getting around 78-80C on load with FMA3 version of Prime95. Is that normal?

thanks!
 
What are your ambient temps and CPU voltage? Those temps are very high for such a low overclock.
 
20C inside case, 4 GHz at 1.15V, tried reseating heatsink, with "official" Prime95 (AVX) I'm getting around 68-69C. Higher with the FMA3 version. BTW, I have Arctic Silver 5.

I'm just not sure what to expect with this cooler.
 
k3ack3r said:
Hi, I have a Hyper 212 Evo with a i5 4670K at 4GHz and I'm getting around 78-80C on load with FMA3 version of Prime95. Is that normal?

thanks!
Click to expand...

Where are your load temps after say only 2-5 minutes? We just happened to be discussing this in a similar thread, but I have the same chip as you and it is currently at the same speed, but with the stock cooler.

Hwmcmrl.png
 
Yeah, 68-69 sounds about right. I have my 4770k at 4.1GHz @ 1.185v temps get up to about 70*C (cpu mining at full load) with slightly warmer temps in the case because I also have two non-reference cards (7950 and 7850) mining which blow all the hot air inside the case. I am using CM Hyper 212+ with only one fan and AS5.

Just turned on prime miner, temps are 61*C after less than 5 min of mining.

You really shouldn't expect much from a CM Hyper 212... Adding a second fan doesn't help much either. It may lower your temps by 1-2*C but it's practically useless since the heatsink itself barely gets warm to the touch.
 
Last edited:
You must log in or register to reply here.

TRENDING THREADS

Back
Top