Hi....
Was trying to install 2 GeForce 2 MX cards on one computer?
I tried that and it wouldn't display anything.
Here are the specs I'm working with:
PIII 450 on a Abit BX6 rev. 2
1 AGP Visiontek GeForce2MX 32mb ram
1 PCI Extasy GeForce 2MX 32mb ram
128mb ram
Win98 OS
Latest Bios Update
2 monitors
Changing the PCI slots didn't help.
Tried it on a newer board(Epox 8kta3) with Win98 didn't help either - same problem
System would boot up(assumption because I can hear the HD running) but the no display.
I've set in the bios to use the AGP as the init display.
Other than that, I really haven't change anything in the bios.
I'm assuming that it's a bios setup problem because it wouldn't display anything on boot up.
If anybody have any idea on what I could do to remedy this or have done this before, please e-mail me at modem_man@hotmail.com or reply to this thread.
TIA.
Was trying to install 2 GeForce 2 MX cards on one computer?
I tried that and it wouldn't display anything.
Here are the specs I'm working with:
PIII 450 on a Abit BX6 rev. 2
1 AGP Visiontek GeForce2MX 32mb ram
1 PCI Extasy GeForce 2MX 32mb ram
128mb ram
Win98 OS
Latest Bios Update
2 monitors
Changing the PCI slots didn't help.
Tried it on a newer board(Epox 8kta3) with Win98 didn't help either - same problem
System would boot up(assumption because I can hear the HD running) but the no display.
I've set in the bios to use the AGP as the init display.
Other than that, I really haven't change anything in the bios.
I'm assuming that it's a bios setup problem because it wouldn't display anything on boot up.
If anybody have any idea on what I could do to remedy this or have done this before, please e-mail me at modem_man@hotmail.com or reply to this thread.
TIA.
Facebook
Twitter