• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Harddrive causing lag?

fourty03

Member
Hey guys....

The problem I am having is that after Win 7 boots (about 3 minutes after sitting idle)
I get severe lag. The computer responds to my input (clicking start menu... launching an app...).. it can take up to 15 - 20 seconds to respond.

My system is as follows:

BIOSTAR 785G motherboard
AMD x2 250
Ocz 2gb ram
Ari 4650 512mb videocard
80gb maxtor hd
80gb seagate hd

The maxtor is the master.... and its the one that I can hear it seeking during the "lag"....

Thanks for the help guys!
 
A likely cause of the lag is because your system is busy doing something like indexing or system restore shadow copies. Also, those are very small HDDs - how full are they in general percentage terms?
 
Thanks for the reply....

I've turned off the indexing and disabled sys restore.... these hds came from my previous system. They are both about 80 % full or so...

Whem I boot into safemode the system hangs when it loads atipcie .... which I think that is my pciexpress card.

I removed it and that didn't help.
 
Is it that laggy from a fresh install of Win7? If so, then I'd lean towards a hardware problem. Otherwise, does Win7 show a bunch of disk writes or heavy RAM usage in the task monitor?
 
Check the Windows System Event Log for Disk-related errors. Older Maxtor disks, in particular, are likely to fail earlier than expected.

Also, if you are using SATA disks:
I had symptoms identical to yours when I installed Windows 7 with the Intel ICH 10R disk controller in AHCI mode. I'd click and nothing would happen for twenty seconds.

"Updating" the disk controller from the built-in MS AHCI driver to the Intel AHCI driver fixed my problem immediately.

Edit:
I guess you likely aren't going to be using Intel AHCI drivers, since you have an AMD motherboard.
 
Last edited:
Back
Top