Hard drive help please, Windows not recognizing.

[RJShultzie]

I have a couple of hard drives that came out of DVR's that I was going to use in my computer but they either don't get recognized or windows can't be installed on the drive.
I am not a advanced computer guy, I can follow basic instructions and put a computer together but most technical talk goes over my head quickly.

During POST I get hard drive error or no drives found

Any help would be appreciated, are there jumpers or utilities to try and make these work?

HD #1
Hitachi CinemaStar 500GB P/N 0A37097 Model HCP725050GLA380 Sata 3.0 7200 RPM
HD #2
Seagate Pipeline HD .2 500GB P/N 9GW132-262 Firmware ES12 Sata
HD#3
This one worked for a week but now it doesn't get recognized
WD 320G dont know model it is still installed

MB
ASUS M4A89GTD PRO
AMD PH II 925
WIN 7 x64 PRO

Thanks in advance

Is there a utility to copy my hard drive I am using now (older 160GB) to a new drive as a complete copy so I could use the new drive without re installing windows etc.. just pull out the old and put in the new and have it working just like the older drive for settings etc...

 

[jjmIII]

rt click "my computer" select "manage"

go to "disk management" on the left

see it now?

 

[jjmIII]

During POST I get hard drive error or no drives found

Make sure your bios is still booting to your OS drive, and not one of the drives you just added.

 

[RJShultzie]

I have a old HD in there which is working and is the boot drive but if I hook up these other drives I get 3rd disk error and they dont show up.
1st is boot HD
2nd is CD/DVD
3rd is error