Ham radio shouldn't interfere with 2.4g wireless. Ham Radio (50Mhz+ (you're a Tech, right? )) is more likely to cause interference on phone line (or Cat-anything) UTP than it is wireless. If you're on World Bands (1.6 M - 50MHz), if your antennas aren't grounded properly (or you're using something like a G5RV style antenna) you can get some pretty good potential on the networking cable (enough to kill a system).
If your antennas are set up right with decent coax (or better), and single-point grounded (etc etc etc ) then it shouldn't be a problem.
Good Luck
Scott, WV9A