hahhaha

[Elcs]

Originally posted by: dug777

Originally posted by: RichUK

Originally posted by: Lonyo

Originally posted by: Elcs

Originally posted by: RichUK

Originally posted by: Elcs

1.862v 😱

i think the volts can be achieved with BIOS mods.. but it will most likely frie the mem controllers within a matter of hours ... TOASTY 😀

Yeah I know but thats just not a fun voltage. I wouldnt even pump that much through my T'Bred B.

Wuss 😛 I pumped that through my Barton, even hit 1.9v IIRC (but only for a very short while)

^^ and then puff .. a ring of smoke came up from the processor 😛 ^^

😛 i think i've got 1.8v going through my tbred-b stock HSF (and my board over volts so that easily...), they are good for up to 2.2v according to AMD with the right cooling....

My Mobile Barton fried at 1.8V Actual. I learned my lesson.

Im idling at around 45-48C with my SLK-900A w/ 92mm Panaflo L1A. 2.2 Ghz, 1.70V actual vcore. Cant complain to be honest.

 

[sangyup81]

Originally posted by: theman
what do you exspect for a cpu running that fast?

That CPU isn't THAT fast. Remember this is SuperPi 2M, not 1M

 

[theMan]

yeah, and it did it in 20 seconds, where it would take yours about 1:20

 

[RichUK]

Originally posted by: Elcs

Originally posted by: dug777

Originally posted by: RichUK

Originally posted by: Lonyo

Originally posted by: Elcs

Originally posted by: RichUK

Originally posted by: Elcs

1.862v 😱

i think the volts can be achieved with BIOS mods.. but it will most likely frie the mem controllers within a matter of hours ... TOASTY 😀

Yeah I know but thats just not a fun voltage. I wouldnt even pump that much through my T'Bred B.

Wuss 😛 I pumped that through my Barton, even hit 1.9v IIRC (but only for a very short while)

^^ and then puff .. a ring of smoke came up from the processor 😛 ^^

😛 i think i've got 1.8v going through my tbred-b stock HSF (and my board over volts so that easily...), they are good for up to 2.2v according to AMD with the right cooling....

My Mobile Barton fried at 1.8V Actual. I learned my lesson.

Im idling at around 45-48C with my SLK-900A w/ 92mm Panaflo L1A. 2.2 Ghz, 1.70V actual vcore. Cant complain to be honest.

haha .. you actually freid the chip .. does the M-Bartons have the heat spread (i dont think they do but?) what did it looklike the core that is?? 😀😀

 

[GuitarDaddy]

This is total BS! Probably achieved with the known Asus A8n CPUZ bug. With certain bios and in certain instances on the A8N CPU-Z shows HTT at 4x the actual. There was a guy a month or so ago that topped the CPU-Z hall of fame for about 1/2 day until they figured out it was bogus and pulled it off. He got a CPU-Z verified shot with an A64 3000+ at over 7ghz:Q on the A8N. I took a digi pic of my A8N-SLI a couple of months ago showing 5850mhz with a 3200+😀. This usually happens on the first boot after a nasty overclocking crash

And that SuperPI is photochopped, no doubt.

 

[Maluno]

Originally posted by: BespinReactorShaft
R u using teh Crystalz??

:laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

 

[Elcs]

Originally posted by: RichUK

Originally posted by: Elcs
My Mobile Barton fried at 1.8V Actual. I learned my lesson.

Im idling at around 45-48C with my SLK-900A w/ 92mm Panaflo L1A. 2.2 Ghz, 1.70V actual vcore. Cant complain to be honest.

haha .. you actually freid the chip .. does the M-Bartons have the heat spread (i dont think they do but?) what did it looklike the core that is?? 😀😀

The core looks the same as any other core. No heatspreader. Looks perfectly normal. It just wont get past the POST.

 

[SonicIce]

proly not stable enough to run a game

 

[RichUK]

Originally posted by: GuitarDaddy
This is total BS! Probably achieved with the known Asus A8n CPUZ bug. With certain bios and in certain instances on the A8N CPU-Z shows HTT at 4x the actual. There was a guy a month or so ago that topped the CPU-Z hall of fame for about 1/2 day until they figured out it was bogus and pulled it off. He got a CPU-Z verified shot with an A64 3000+ at over 7ghz:Q on the A8N. I took a digi pic of my A8N-SLI a couple of months ago showing 5850mhz with a 3200+😀. This usually happens on the first boot after a nasty overclocking crash

And that SuperPI is photochopped, no doubt.

yeah i remember that ..lol