got my true480!!!

[leeperpsu]

thats right kiddies 480 massive watts

i'm doing some higher overclocks....right now i'm up to fsb 211 with mem timings at 11,2,2,2 still!!!

cpu is only at 11 multi though..🙁

i hope to get 11 multi and fsb of 220

i'll keep all you posted even if you don't care


oh and P.S i recommend this psu to anyone.....very nice and solid!! 🙂

 

[bjc112]

Originally posted by: leeperpsu
thats right kiddies 480 massive watts

i'm doing some higher overclocks....right now i'm up to fsb 211 with mem timings at 11,2,2,2 still!!!

cpu is only at 11 multi though..🙁

i hope to get 11 multi and fsb of 220

i'll keep all you posted even if you don't care


oh and P.S i recommend this psu to anyone.....very nice and solid!! 🙂

So leep you think that was the problem?

My sparkle 350w is currently running...

1700+@ 2.4ghz 1.775v
1 gig PC 3200
Radeon 9500 Pro
2 - Optical drives
1 - 80 GB WD
1 - 40 GB Maxtor
3 - Case fans, 1 which has an LED.
2 - Cold cathodes
And two LED strips down the front of my case....

Hopefully that antec worked out your issues..

 

[leeperpsu]

yea i think it helped out ALOT!

my ram is kicking some ass too!

its at 422MHz and timings are 11,2,2,2!!

bad news is i think my cpu maxes out at 2.37GHz with 1.800V.

should i up the voltage some more to get higher????

 

[AkumaX]

har har.. i thought you meant true ddr480 😛

 

[bjc112]

Originally posted by: leeperpsu
yea i think it helped out ALOT!

my ram is kicking some ass too!

its at 422MHz and timings are 11,2,2,2!!

bad news is i think my cpu maxes out at 2.37GHz with 1.800V.

should i up the voltage some more to get higher????

You could up it to 1.85v, but your starting to push it there... If it isn't stable past that it's the end of the road...

Try it for a few hours, if you even get a little bit pf instability back it down to 1.775, that way you lower your voltage and temps... While still saving your chip 😉

 

[leeperpsu]

well my fsb is 213

memory is 426 w/ timings 11,2,2,2

going good so far!

 

[4x4expy]

Originally posted by: bjc112

Originally posted by: leeperpsu
yea i think it helped out ALOT!

my ram is kicking some ass too!

its at 422MHz and timings are 11,2,2,2!!

bad news is i think my cpu maxes out at 2.37GHz with 1.800V.

should i up the voltage some more to get higher????

You could up it to 1.85v, but your starting to push it there... If it isn't stable past that it's the end of the road...

Try it for a few hours, if you even get a little bit pf instability back it down to 1.775, that way you lower your voltage and temps... While still saving your chip 😉

Are these your BIOS set temps or true measured? I wouldn't go above 1.8v if you are only going to get 20-30mhz more out of the CPU. I say this because you should see a sharp rise in temps if you are air cooling when around 1.8v.

 

[leeperpsu]

the barton is pushing 2.36
and memory is 430MHz with timings 11,2,2,2

i'm only getting 17,120 in 3dmark2001se

 

[leeperpsu]

hey 4x4expy

your getting some decent 2001se scores from your 9500 card nice overclocking!
but you'd think your 2001se score wouldn't be that high from the looks of your pcmark2002 scores.

but i guess that shows how important video card spec are for gaming benchmarks

 

[leeperpsu]

heres some pcmark2002 scores

cpu = 7366
mem = 6981
HD = 1197

rock on

 

[VisableAssassin]

nice score dude 🙂

im running an antec true power 550w rails sit at 12.10v 5.03v and 3.3v constantly and never drop 🙂

running
2500+ @ 2.3ghz 1.975v
1 120mm panaflo M1a
4 80mm panaflo H1a
2 80mm panaflo L1a
1 80mm sunnon 36cfm
2 optical drives
1 80gb 7200 rpm maxtor
1 49gb 5400 rpm maxtor
1 30gb 7200rpm maxtor
1 30gb 5400 rpm western digital (real flaky tho 🙁 )

and still got room to grow 🙂