Got my 1.8A to 2.7

[Stallion]

I got it to 150fsb and ran 3dmarks and pulled down 13758. Woot Woot I will admit that it didn't run any other tests yet so it might crap out under some serious stress. I had the voltage at 1.625 and my ram was at 2-2-2-6.

 

[dbwillis]

Not bad at all!

 

[Stallion]

thanks, one of these days I'll try somememory tests and see how that goes.

 

[ChampionAtTufshop]

nice
which mobo was it?

 

[Stallion]

Asus P4PE , it sure beats my P4S333. Although I did get my 1.6A to 140fsb on my P4S333

 

[jhites]

Your Woot Woot Link goes to BD7II, AIW 8500 @ 9905 3D Marks.

Maybe that is your old system or could be mine. They are almost the same as mine except for bus speed.

 

[WheelsCSM]

I have a P4S333, what's better about the P4PE (other than maybe you couldn't get the FSB over 140)?

Just curious, I'm pretty happy with mine... running at 150 FSB for almost a year now.

 

[Stallion]

Originally posted by: jhites
Your Woot Woot Link goes to BD7II, AIW 8500 @ 9905 3D Marks.

Maybe that is your old system or could be mine. They are almost the same as mine except for bus speed.

Hummm, for me it goes to my 3dmarks page..... weird


For me I couldn't get my P4s333 over 140 and I knew my 1.6A was capable of more. PlusI heard the Intel chipsets are a little bit better then the SiS. not saying that the p4s333 s bad, I still have mine and I'm going to use it to build my wifes PC.

 

[THUGSROOK]

ok ill say it then ~ the p4s333 is a very bad motherboard for overclocking

nice job so far ~ chances are prime95 and memtest86 are gonna tear it down a few fsb tho.

 

[Technonut]

Nice processor... Is it a SL68Q? My SL68Q 1.8A is still humming along after many months at 2900MHz. (1.74V)

 

[CraigRT]

Whats your video card?
i got my 1.8A @ 2.7 right now too. i am sure it will go higher.
but with little case cooling and a stock cooler, don't see it going anywhere fast.
i got 12,500 with a Ti4200 when running at 2.7
but the memory was running synchronous to FSB cause my memory wouldn't run at 4:3
so the memory was only at DDR2400.

 

[Stallion]

Originally posted by: Technonut
Nice processor... Is it a SL68Q? My SL68Q 1.8A is still humming along after many months at 2900MHz. (1.74V)

Yep it's a sl68q.


Yeild. I have a leadtek Ti4400 card, I also have plenty of cooling with 5 case fans and an Alpha pal on my chip At 2700 my ram is at DDR400 It's Corsair XMS 3200. a 512mg stick.

 

[CraigRT]

Originally posted by: Stallion

Originally posted by: Technonut
Nice processor... Is it a SL68Q? My SL68Q 1.8A is still humming along after many months at 2900MHz. (1.74V)

Yep it's a sl68q.


Yeild. I have a leadtek Ti4400 card, I also have plenty of cooling with 5 case fans and an Alpha pal on my chip At 2700 my ram is at DDR400 It's Corsair XMS 3200. a 512mg stick.

Damn, that would help my system alot.
Well, my Kingston Hyper-X 3500 should be here soon.

nice job.

 

[Imported]

I hit 2.7 with my 1.8 the other day. 3dMark worked fine, but memtest failed very quickly..

 

[Stallion]

Originally posted by: Yield

Originally posted by: Stallion

Originally posted by: Technonut
Nice processor... Is it a SL68Q? My SL68Q 1.8A is still humming along after many months at 2900MHz. (1.74V)

Yep it's a sl68q.


Yeild. I have a leadtek Ti4400 card, I also have plenty of cooling with 5 case fans and an Alpha pal on my chip At 2700 my ram is at DDR400 It's Corsair XMS 3200. a 512mg stick.

Damn, that would help my system alot.
Well, my Kingston Hyper-X 3500 should be here soon.

nice job.

thanks, I already turned it back down to 140fsb and put the V back at 1.55 I just turn it up when I bored to see how high a score I can get.

Imported, that's kind of why I haven't tried any other tests. I would hate for it to bomb thus shattering my fragile hopes of having a bad ass PC.

 

[Bad Dude]

Is your chip B0 or C1?

 

[ChampionAtTufshop]

Originally posted by: Bad_Dude
Is your chip B0 or C1?

B0

 

[Bovinicus]

Who said the days of the 300A@450 are gone? That is a really nice solid 50% overclock you have going there. I'm interested to try the 1800+ 130nm Athlon XP. The lower speed newer process CPUs always do well. Good one.

 

[Derick]

Originally posted by: Stallion

Originally posted by: jhites
Your Woot Woot Link goes to BD7II, AIW 8500 @ 9905 3D Marks.

Maybe that is your old system or could be mine. They are almost the same as mine except for bus speed.

Hummm, for me it goes to my 3dmarks page..... weird

It actually goes to the current project of who ever is viewing it. You need to publish it, then use the compare link for that project.
Such as this My system.