Good alternative to Teflon cookware?

ControlD

Diamond Member
Apr 25, 2005
5,440
44
91
My last set of Teflon cookware (probably 10 years old now) is really starting to flake off. After reading the thread here about the lawyer that took on DuPont, I'm not sure I want to use Teflon cookware anymore.

Is there a good alternative? Something that is somewhat non-stick? I thought about starting with a couple of All-Clad pieces, but cast iron is much more affordable. Then there are the enamel coated cast iron pieces but they seem to range a lot in price and quality. I guess I don't mind paying good money for something that lasts more than 10 years. I'm tired of using pans that wear out over time.
 
Feb 4, 2009
35,862
17,402
136
We opicked up some of those ceramic ones, they work pretty well. The pan has a white coating on it.
 

Riverhound777

Diamond Member
Aug 13, 2003
3,360
61
91
Cast iron works, but be prepared for a learning curve. It's not non-stick like a Teflon pan, you have to work at it a bit. I seasoned and seasoned mine and still need to put in some oil or butter to get eggs not to stick. Be patient.
 

ControlD

Diamond Member
Apr 25, 2005
5,440
44
91
My wife and I just learned to cook without non-stick. It wasn't hard to do. The only thing we have now is a small ceramic pan for eggs.

I'm assuming you just need to use a little oil or butter in the pan with most things to prevent sticking. I have a large stainless skillet that I use already for things like chicken and rice and it works pretty well for those types of meals. I'm not sure I could make an omelet in it without making a mess though.
 

MongGrel

Lifer
Dec 3, 2013
38,466
3,067
121
Just watch turning up the heat too high on some ceramic pans, but I imagine they vary.

Can hurt some a bit, I managed to hurt the coating on one skillet in the past year that way. Some are better than others I imagine.

Have cast iron I tend to use a lot myself these days. Getting them broken in right etc takes a little work over time, but are great for any things. I never wash mine in soap and water, but I grew up with the family having a lot of cast iron so was always used to using it.

Cast Iron lasts a very long time if you get it seasoned right and treat it properly.

That and distributes heat well to begin with.
 
Last edited:

3chordcharlie

Diamond Member
Mar 30, 2004
9,859
1
81
Ceramic is OK but I find it very sensitive to overheating. I have been through a few of them both cheap and expensive, and all have developed fine cracks in the coating. I do blame this on a nameless house member who always manages to burn bacon in the frying pan.

I would guess that used on low-medium heat for things like eggs they should last well.

I've pretty well switch to cast iron for just about everything at this point. I have a large ordinary nonstick pan with a lid for pasta sauce, chili and that sort of thing. It never sees real heat or any other means of damage.
 
Feb 4, 2009
35,862
17,402
136
Do you guys know what brand you have? Are they ceramic coated cast iron? Some of them are super expensive and some are super cheap.

Definitely not cast iron but its not aluminum either. I know the first one we tried was from Target.
 

MongGrel

Lifer
Dec 3, 2013
38,466
3,067
121
Ceramic is OK but I find it very sensitive to overheating. I have been through a few of them both cheap and expensive, and all have developed fine cracks in the coating. I do blame this on a nameless house member who always manages to burn bacon in the frying pan.

I would guess that used on low-medium heat for things like eggs they should last well.

I've pretty well switch to cast iron for just about everything at this point. I have a large ordinary nonstick pan with a lid for pasta sauce, chili and that sort of thing. It never sees real heat or any other means of damage.

Yeah, you do not have to turn ceramic up high to get good results.

Everything else in the large set of them we bought is doing great, I think I managed to degrade that on skillet on bacon myself having it higher than it should have been.

The ceramics we have are just these, the cast iron stuff I have is normal cast, not lined.

Have been pretty happy with the set really, most of it is still pretty much brand new looking/functioning.

http://www.amazon.com/gp/product/B00DGMKS92?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s01

Picked up some silicon cooking utensils also for general use and tossed a lot of stuff old stuff last year. The ones linked there are great, and have a few other larger flippers picked up on the side.

http://www.amazon.com/StarPack-Prem...bxgy_79_2?ie=UTF8&refRID=06NPPCSJY913PJMJ1N6K

http://www.amazon.com/gp/product/B000M8YMEU?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
 
Last edited:

edro

Lifer
Apr 5, 2002
24,326
68
91
I got a small ceramic coated pan from Target for eggs.
It has worked great for the year I have used it.
Better than teflon so far.
I always use PAM or butter, which help a ton.
 

vi edit

Elite Member
Super Moderator
Oct 28, 1999
62,484
8,345
126
I'm not sure trading Teflon for Pam is much of an improvement. That's a can full of it's own sort of chemicals.
 

MongGrel

Lifer
Dec 3, 2013
38,466
3,067
121
I'm not sure trading Teflon for Pam is much of an improvement. That's a can full of it's own sort of chemicals.

Yeah, Canola oil or Olive works as well just for general purpose, even though the wife has a can of Pam around that I do not use. Lard might even be better there :)
 
Last edited:

DAGTA

Diamond Member
Oct 9, 1999
8,172
1
0
Another post for ceramic. They're easy to cook with and clean up very easily.
 

edro

Lifer
Apr 5, 2002
24,326
68
91
PAM is canola oil.
Ingredients: Canola oil, soya lecithin, natural and artificial butter flavour, annatto and propellants isobutane and propane.
We consume so many chemicals as it is, I'm willing to add PAM to the list.
 

MongGrel

Lifer
Dec 3, 2013
38,466
3,067
121
PAM is canola oil.
Ingredients: Canola oil, soya lecithin, natural and artificial butter flavour, annatto and propellants isobutane and propane.
We consume so many chemicals as it is, I'm willing to add PAM to the list.

Like I said, the wife likes to use it here and there :) Had to go look, she even has a can of the olive oil Pam up there.

I think just a bottle of canola oil is just cheaper and lasts longer to begin with I guess.

We both like to cook, so have a few things around.
 
Last edited:

vi edit

Elite Member
Super Moderator
Oct 28, 1999
62,484
8,345
126
PAM is canola oil.
Ingredients: Canola oil, soya lecithin, natural and artificial butter flavour, annatto and propellants isobutane and propane.
We consume so many chemicals as it is, I'm willing to add PAM to the list.

Silicone and propellants...mmmmmmm.

I just stick with a slab of butter or bacon grease :)
 

Denly

Golden Member
May 14, 2011
1,435
229
106
I mainly use cast iron - Lodge Pro 10"/12" and a wok, it will take you a few years with a lot of cooking to build the "season/coating". Once they're "up to speed" they're wonderful.

I also have a set of All-Clad pieces, the biggest issue I have using them is the wall get really hot it make things that stick on the wall burn.
 

MongGrel

Lifer
Dec 3, 2013
38,466
3,067
121
Silicone and propellants...mmmmmmm.

I just stick with a slab of butter or bacon grease :)

I do have a jar of bacon grease I keep around I wasn't going to mention ...

But it gets rotated out now and then.

():)
 
Last edited:

gorcorps

aka Brandon
Jul 18, 2004
30,739
454
126
I remember Alton Brown going on a bit of a tangent about spray oils on his waffle episode. Basically IIRC he said they're good if you get the canola oil ones, and people are overly worried about them.

Regarding the OP, I'm going to start replacing my stuff with cast iron and stainless. Given that the failure point of cookware is usually the coating... if I get some good quality stuff that's not coated it'll last a lot longer.