- Nov 22, 2009
- 210
- 0
- 0
Okay, I'm tired at looking at 50* + temps in my shuttle even with the vcore reduced to 1.3 from 1.35v so I'm going to de-lid it, lapp the lid then re-apply the lid with Arctic Ceramique.
I'll probably be doing this one night tonight after I stop by an auto parts store and grab some Permatex black silicone adhesive to reattache the lid after I'm done.
I've done this before a few times but I'ma see if I can do it without slicing a finger open this time
===
===
===
Prior to CPU dismemberment I get the following temps in OCCT under load OC'd to 2.4ghz using 1.3v:
Core 0: 57 - 61*
Core 1: 56 - 59*
Running at stock 2.2ghz temps are 1 - 3* lower with the same 1.3v I believe.
I'll probably be doing this one night tonight after I stop by an auto parts store and grab some Permatex black silicone adhesive to reattache the lid after I'm done.
I've done this before a few times but I'ma see if I can do it without slicing a finger open this time
===
===
===
Prior to CPU dismemberment I get the following temps in OCCT under load OC'd to 2.4ghz using 1.3v:
Core 0: 57 - 61*
Core 1: 56 - 59*
Running at stock 2.2ghz temps are 1 - 3* lower with the same 1.3v I believe.
Last edited: