god dang... 112 fsb so close but not quite... any tips?

[MustangSVT]

i tried cell 633 at 112fsb since it is so cold outside (yep i tried outside). and it BOOTS!!! with 1.85v , it shows 1062 processor at boot up, but always freezes while loading windows. i have win 98se, and i know it's not a ram problem cause i've used infinion pc133 cas 2 ram(ive tried cas3). the voltage wont go any higher. is it the videocard? hard drive? any tips would be helpful..

on the otherhand, 950 is rock solid with 1.75v.

thanx.

 

[Supradude]

i'm thinking voltage, my roomie is having the same problem getting his Cel II 566 to pass 960 with a CUSL2 and decent PC133 ram... If you got balls, go here "http://www.cotty.btinternet.co.uk/vidpin.htm" and up your default voltage to 1.65v or even 1.9v! and go for that 112 fsb!!! i myself have done this once with a 566 and was succesful, it does work, just gotta be careful and try to use decent quality copper wire (i.e. a strip from an IDE cable works pertty good) good luck!