Gigabyte mobo can't see RAID 0 boot HD after bios update

[mlah384]

I have a GIgabyte z77-ud5h. I upgraded to the latest bios. I have 2 Plextor SSDs in raid0 with Win 10.

After updating bios. The system no longer saw the RAID therefore couldnt boot into windows. I made sure it was set to RAID in bios, and I made sure the Marvell section was set to Raid too. I was thinking maybe it's a driver issue, so I tried loading the drivers by booting from win10 usb and going into "install" screen, but that didn't work.

I finally removed the raid and recreated it. Then I installed Win10 on the new formated Raid. When it rebooted, it cant see the Raid and just has the blue "Recovery" screen saying File:\Windows\system32\winload.exe error code...

Help!

Thanks

 

[vailr]

You can try booting from the secondary bios with Ctl-F10.
If that doesn't allow Windows booting up, then the Raid bios configuration needs further investigation.
If the Raid drive setup was initially configured using the Intel SATA ports, then the Marvell SATA ports can (and probably should be) disabled in bios setup, if not being used.