Gigabyte DS3 OC question

[soulcougher73]

This is my first Gigabyte board, but for some reason in the BIOS i cannot find where to OC my ram. I have an E6600 and id like to get up to 3.2-3.6 range if possible. CPU-Z shows my timings off as well and i cannot find that to manually set it in the BIOS either.

Anyone with this board shed some light on me? 🙂

Thanks

 

[crazedmodder]

Gigabyte boards have hidden things in their BIOS, including the RAM settings. In the BIOS just press CTRL+F1 and everything will show up for you 😀 Have fun!

 

[Conky]

Originally posted by: crazedmodder
Gigabyte boards have hidden things in their BIOS, including the RAM settings. In the BIOS just press CTRL+F1 and everything will show up for you 😀 Have fun!

Yep, at the main bios screen do the CTRL+F1 thing and then when you go into the MB Intelligent Tweaker (M.I.T.) screen there will be a whole bunch of new options.

This is a little Gigabyte weirdness... they will let you overvolt everything on your system but heaven forbid you try to adjust the RAM timings! :roll: :laugh:

 

[soulcougher73]

Ok i got to this part with the CTRL+F1 thing and adjusted my timings, but how do i up the ram to O/C? I cant seem to find this area.

 

[Diogenes2]

Try page 43 of the manual ..

Ram will follow the CPU Host Frequency multiplied by the System Memory Multiplier ...

 

[soulcougher73]

My old ASUS seemed so much more straight forward to OC then this Gigabyte. Anyone got a OC for dumbies specifically for the DS3? I got good DDR2 800 with micron D9's. Shouldnt be too hard i wouldnt think.