• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

gigabyte bios ? picture added

S

Strawberrymom

Banned
i can go into pci/agp divider

and it gives me things like pll/and like 5 numbers to choose from.

what exactly does these do?

the manula doesnt provide the info
 
It allows you to run your PCI and AGP buses at frequencies other than the default. If the frontside bus for your mobo is 133MHZ, the default divider would be /4 which sets your PCI bus at 33Mhz which is the default. If you overclock your front-side bus, that also would bump the speed for your PCI/AGP cards and many cards don't like that. The divider allows you to set the divider to something besides the default to keep your PCI/AGP cards at a speed that they'll work.

Unless you are overclocking, leave it to the default setting.

 
of course have to overclock

this is what i have listed

pll/16
pll/20
pll/24
pll/32
pll/40

so far the 1.8 is up to 1924 x 107

but i want to make sure the pci stays stable so i can go higher.

what settings do i use since the manual doesnt cover this
 
Maybe someone else has some ideas. Those settings don't look like any PCI divider settings I've seen. Usually you see /3, /4, /5 and sometimes /6.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top