new to c2d + ddr2 
what bios settings should i use?
im sitting at 9 x 300 with an e4300. MIT says i should put it in auto, so i did. bios is F8. boot into windows, ran easy tune 5
easy tune 5 says that my vcore is 1.45v and memory at 2.1v. i think these are too high. what options should i tweak in easytune or bios? thanks
edit: following this guide @ http://www.legionhardware.com/document.php?id=610 (from ocforums), i was able to get it at 333mhz. is there a better monitoring program for the s3?
what bios settings should i use?
im sitting at 9 x 300 with an e4300. MIT says i should put it in auto, so i did. bios is F8. boot into windows, ran easy tune 5
easy tune 5 says that my vcore is 1.45v and memory at 2.1v. i think these are too high. what options should i tweak in easytune or bios? thanks
edit: following this guide @ http://www.legionhardware.com/document.php?id=610 (from ocforums), i was able to get it at 333mhz. is there a better monitoring program for the s3?
Facebook
Twitter